6308CT Conductivity / TDS / Temp. Multi-Parameter Analyzer [6308CT] - $529.00 : Jenco, pH meters, ORP meters, Conductivity meters, Dissolved Oxygen meters, transmitters and controllers

My Account

You are here: Home > Conductivity & TDS > In-line > 6308CT Conductivity / TDS / Temp. Multi-Parameter Analyzer

larger image

6308CT Conductivity / TDS / Temp. Multi-Parameter Analyzer

Starting at: $529.00

Model: 6308CT
Shipping Weight: 4lbs
24 Units in Stock
Manufactured by: Jenco

View product manual

Buy

Quantity

Select Electrode Option

392-122 Conductivity Electrode for Pure Water , K= .01 (+$150.00)

392-123 Conductivity Electrode Stainless Steel / Platinum, K=10 (+$150.00)

Select Other Accessories

PMBSS Pipe Mount Bracket, Stainless Steel (+$59.00)

Conductivity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP-65 case, and selectable 2 or 4- wire cells. Has programmable reference temperature and coefficients. The 4-20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity and one relay for temperature and an RS-485 interface. Password & ID protected. Graphical display. CE approved. 115/230V AC.

Features

Bumpless Calibration
CE Approved
RS-485 Output
Programmable Relays For Conductivity
Reversible And Isolated 4 To 20mA Output
Programmable Relay For Temperature
Conductivity/Temp.Measurement & Control
Simultaneous Analysis And Display For Measurement And Controls
User Programmable Reference Temperature Temperature Coefficient
Selectable 2-Wire Or 4-Wire Cells For Long Cable Length & Wide Measurement Range

Specifications

Primary Specs

		Range/Resolution/Accuracy
Conductivity, K=0.1		0.000 to 9.999 uS/cm 0.001 uS/cm ± 0.5 % ± 1 LSD 10.00 to 99.99 uS/cm 0.01 uS/cm ± 0.5 % ± 1 LSD 100.0 to 300.0 uS/cm 0.1 uS/cm ± 0.5 % ± 1 LSD
Conductivity, K=1		100.0 to 999.9 uS/cm 0.1 uS/cm ± 0.5 % ± 1 LSD 1.000 to 9.999 mS/cm 0.001 mS/cm ± 0.5 % ± 1 LSD 10.00 to 30.00 mS/cm 0.01 mS/cm ± 0.5 % ± 1 LSD
Conductivity, K=10		1.000 to 9.999 mS/cm 0.001 mS/cm ± 0.5 % ± 1 LSD 10.00 to 99.99 mS/cm 0.01 mS/cm ± 0.5 % ± 1 LSD 100.0 to 300.0 mS/cm 0.1 mS/cm ± 0.5 % ± 1 LSD
TDS, K=0.1		0.000 to 5.000 ppm 0.001 ppm ± 0.5 % ± 1 LSD 5.000 to 50.00 ppm 0.01 ppm ± 0.5 % ± 1 LSD 50.00 to 150.0 ppm 0.1 ppm ± 0.5 % ± 1 LSD
TDS, K=1		50.00 to 500.0 ppm 0.1 ppm ± 0.5 % ± 1 LSD 0.500 to 5.000 ppt 0.001 ppt ± 0.5 % ± 1 LSD 5.000 to 15.00 ppt 0.01 ppt ± 0.5 % ± 1 LSD
TDS, K=10		0.500 to 5.000 ppt 0.001 ppt ± 0.5 % ± 1 LSD 5.000 to 50.00 ppt 0.01 ppt ± 0.5 % ± 1 LSD 50.00 to 150.0 ppt 0.1 ppt ± 0.5 % ± 1 LSD
Temp		- 10.0 to 120.0 °C 0.1 °C ± 0.3 °C

Conductivity

Reference Temperature: 10 °C to 29.0 °C
Temperature Coefficient: 0.0 % to 4.99 %
Basic Cell Constant: 0.01,1 and 10.0
Cell Constant Range: ±30% of Basic Cell Constant

Output Relays

Output Relays numbers: Two Programmable High or Low Relays for Conductivi
Control Type: On/Off
Relay Output (Resistive Load Only): 5 Amps at 115 VAC, 2.5 Amps at 230 VAC
Relay Set Point Hysteresis: User Programmable

Current Output

Current Output: Isolated 4 to 20 mA
Range: Selectable Zero, & Span
Accuracy: ± 0.02mA
Isolated Voltage: 500 VDC
Maximum Load: 500 Ohms

General

ATC Sensor: Thermistor 10KiloOhms at 25 °C
Security Protection: 4 digit password
Keypad: Audio feedbackup
Communication: RS-485
Display: Graphic LCD w/Backlight
Power source: 115/230 VAC ,50/60Hz
Dimensions: 1/4 DIN ,Depth 148 mm
Weight: 950 gm

Customers who bought this product also purchased...

C621-1-4-2-020T Conductivity Electrode for Pure Water, 3/4"MNPT,316LSS,K=0.01,10K,TEFLON INSULATER, 20-ft Cable

Reviews

There are currently no product reviews.
NOTE: Reviews may require prior approval before they will be displayed

Product 3/3