6308DT 1/4 DIN Dissolved Oxygen Analyzer with Programmable Pressure and Salinity Compensation

Starting at: $569.00

  • Model: 6308DT
  • Shipping Weight: 4lbs
  • 19 Units in Stock
  • Manufactured by: Jenco
  View product manual
Tell a Friend

Buy

Quantity


Select Electrode Option



Select Other Accessories

D.O. analyzer, 1/4 DIN panel mount IP-65 waterproof case, polarographic sensor with replaceable membranes and programmable pressure and salinity compensation. Features 4 fully programmable D.O. relays and 1 for temperature. Has an RS-485 interface and is password protected. Analog 4-20 mA output is fully programmable and reversible. Graphical display. Connections are tinned leads. CE Approved.

Features

  • Bright, Graphical LCD Display, 1.5 X 2.25
  • Simultaneous Measurement And Analysis
  • 1/4 DIN Watertight, IP65 Rated Enclosure
  • Reversible & Isolated 4 To 20mA Output With Adjustable Bandwidth
  • Continuous Controller / Relays Operation During Calibration
  • 4-Digit Password Security Protection
  • Programmable Set Point Hysteresis
  • Automatic Temperature Compensation
  • CE Approved
  • Built In ISO9001 Certified Facility
  • Membrane Keypad With Audio Feedback
  • Power Down, Non-Volatile Memory Backup

Specifications

Primary Specs
    Range   Resolution   Accuracy
  Dissolved Oxygen (ppm)   0.0 to 60.00 ppm   0.01 ppm   ± 0.2% of span
  Dissolved Oxygen (% )   0 to 500.0%   0.1 %   ± 0.2% of span
  Temp.   -10.0 to 120 °C   0.1 °C   ±0.1°C ±1 LSD

Dissolved Oxygen
  • Salinity compensation: 0.0 to 40.0 ppt
  • Pressure compensation: 600 to 1100 mBar
  • Polarographic sensor: Yes
  • Replaceable membranes: Yes
Output Relays
  • Control Type: On/Off
  • Relay Output (Resistive Load Only): 5 Amps at 115 VAC 2.5 Amps at 230 VAC
  • Relay Set Point Hysteresis: User Programmable
Current Output
  • Type: Isolated 4 to 20 mA
  • Range: Selectable Zero, & Span
  • Accuracy: ±0.02mA
  • Isolated Voltage: 1000 VAC
  • Maximum Load: 500 W
General
  • ATC Sensor: Thermistor 10KiloOhms at 25 °C
  • Security Protection: 4 digit password
  • Keypad: Audio feedbackup
  • Communication: RS-485
  • Pre-Amplifier Voltage: ±5 VDC,20mA Max Output
  • Power source: 115/230 VAC ,50/60Hz
  • Dimensions: 1/4 DIN ,Depth 155mm
  • Weight: 950 gm

Reviews

There are currently no product reviews.
NOTE: Reviews may require prior approval before they will be displayed

Write Review

Product 1/2

Previous
Return to the Product List
Next
Copyright © 2007 Jenco Instruments. Powered by Zen Cart.
SSL