6308PT 1/4 DIN Panel Mount pH Single Parameter Analyzer

Starting at: $499.00

  • Model: 6308PT
  • Shipping Weight: 4lbs
  • 33 Units in Stock
  • Manufactured by: Jenco
  View product manual
Tell a Friend

Buy

Quantity


Select Electrode Option



Select Other Accessories

1/4 DIN panel mount pH single parameter analyzer with electrode efficiency display function. Features pH linear or antilog transmitter output, hysteresis control and uninterrupted operation during pH calibration. Has one 4-20mA output, 5 relays and a RS-485 communications interface. Graphical display. 115/230V AC. CE Approved.

Features

  • Bright, Graphical LCD Display, 1.5 X 2.25
  • Simultaneous Measurement And Analysis
  • 1/4 DIN Watertight, IP65 Rated Enclosure
  • Reversible & Isolated 4 To 20mA Output With Adjustable Bandwidth
  • Continuous Controller / Relays Operation During Calibration
  • 4-Digit Password Security Protection
  • Programmable Set Point Hysteresis
  • Automatic Temperature Compensation
  • CE Approved
  • Built In ISO9001 Certified Facility
  • Membrane Keypad With Audio Feedback
  • Power Down, Non-Volatile Memory Backup
  • RS-485 Output
  • Multiple Spst On/Off Relay
  • Embedded Self Diagnostic Program
  • High 50/60 Hz Noise Rejection

Specifications

Primary Specs
    Range   Resolution   Accuracy
  pH   -2.00 to 16.00   0.01 pH   0.1% ± 1 lSD
  Temp.   -10.0 to 120 °C   0.1 °C   ±0.3 °C

pH
  • Temperature Compensation Range: -10.0 to 120.0 °C
  • Buffer Recognition: 4.01, 7.00, 10.01 / 4.00, 6.86, 9.18
  • Buffer Temperature Range: 0 to 60.0 °C
  • Electrode Slope Compensation: ±30% of Ideal Slope
  • Electrode Offset Compensation: ±100 mV
  • Input Impedance: Greater than 10 exp(13) Ohms
  • Calibration Auto End Point Sensing: Yes
Output Relays
  • pH: 2 programmable high or 2 low
  • Temperature: 1 programmable high or 1 low
  • Control Type: On/Off
  • Relay Output (Resistive Load Only): 5 Amps at 115 VAC 2.5 Amps at 230 VAC
  • Relay Set Point Hysteresis: User Programmable
Current Output
  • Type: Isolated 4 to 20 mA
  • Range: Selectable Zero, & Span
  • Accuracy: ±0.02mA
  • Isolated Voltage: 500 VDC
  • Maximum Load: 500 W
General
  • ATC Sensor: Thermistor 10KiloOhms at 25 C
  • Security Protection: 4 digit password
  • Keypad: Audio feedbackup
  • Communication: RS-485
  • Pre-Amplifier Voltage: ±5 VDC,20mA Max Output
  • Power source: 115/230 VAC ,50/60Hz
  • Dimensions: 1/4 DIN ,Depth 148mm
  • Weight: 950 gm

Reviews

There are currently no product reviews.
NOTE: Reviews may require prior approval before they will be displayed

Write Review

Product 5/8

Previous
Return to the Product List
Next
Copyright © 2007 Jenco Instruments. Powered by Zen Cart.
SSL